C&L Adjustable Bump Steer Kit (94-04 Mustang)

Corrects Bump Steer. Eliminate bump steer by correcting the front end geometry of your lowered 1994-2004 SN95 Mustang with the help of C&L's Fully Adjustable Bumpsteer Kit. By replacing your stock, non-adjustable components with a C&L Bumpsteer Kit you will gain better, more predictable cornering and handling.

Fully Adjustable. C&L designed their Bump Steer Kit to be fully adjustable using the included bushing spacers. This will allow you to fine-tune the bump steer geometry of your Mustang for improved steering response and crisp balanced handling.

Straight Forward Installation. This C&L Adjustable Bump Steer Kit was designed to be a direct bolt-on replacement upgrade. Please note that an alignment is highly recommended after installation.

Application. This C&L Adjustable Bump Steer Kit is designed to fit 1994-2004 Ford Mustang models.

NOTE: Bump Steer is a change in toe angle caused by the suspension moving up or down. Bump Steer is built into the geometry of the suspension and steering system, and has nothing to do with turning the steering wheel. The effect of bump steer is for the wheel to toe-in or toe-out when the suspension moves up or down. This toe change or "steering" occurs any time the suspension moves, whether it is from body roll, brake-dive, or hitting a bump in the road. Bump Steer is undesirable because the suspension is steering the car instead of the driver. To fix a bump steer problem, you need to alter the height of the outer tie-rod relative to the steering rack with adjustable tie-rod ends, also known as a bump steer kit.